HOW TO MAKE A MIKROTIK ACT AS A WIRELESS STATION
*PURPOSE: In this case, we have a customer that uses a wireless cell
modem for Internet access which lacks ethernet ports, but we would
also like to give access to some devices that are not wifi enabled.
...
By default Mikrotik use the following LAN subnet, 192.168.88.0/24 with
the gateway IP being 192.168.88.1.
For this example the Mikrotik's subnet is being changed to 10.0.0.0/24
with a gateway IP of 10.0.0.1.
There are six items that will be updated.
...
If you are experiencing high ping times and/or slower than normal
internet speeds, you might be a victim fo a DNS DoS attack.
This article will walk you through creating a firewall rule on
Mikrotik routers to block this attack.
* Log into your Mikro...
In the event port forwarding is needed, a NAT Rule will need to be
created in the Mikrotik.
For this example, the NAT Rule is to allow access to a device on IP
192.168.88.100 using port 80 (extension 100).
For devices such as onsite PBX that have remo...