5. TeamMate PBX Setup

5. TeamMate PBX Setup

PBX Setup

Once Direct Routing is established the next step is to add one or more PBXes, a PBX is  where the SIP configuration is defined in order to achieve SIP Registration.
To add a PBX, login to the TeamMate Portal

https://service.connecttoteams.com

Then select the Enterprise by clicking over the "Enterprise Name" and select the "PBX" menu option from the sidebar


Click on "Add PBX" to open the new PBX provisioning page, the following screenshot shows an example of the information required to complete the new PBX provisioning.


- PBX Type, select "Ringlogix".
- PBX Location, the location of the PBX, you can use a generic name if you have only one PBX. For multiple PBXes would be best to use an accurate PBX location name ( City , State), allowing each PBX to be clearly identified.
- PBX DNS Lookup type, select "SRV"
- PBX Outbound Transport Type, Select “TCP”
- PBX SIP Domain, enter [Your_Domain].pbx.simplelogin.net, for example, if you domain is 112233 the value to be entered will be “112233.pbx.simplelogin.net”
- PBX SIP Domain Proxy, enter pbx1-dfw.ringlogix.com
- Voicemail Feature Code, 5001
- Codecs, select the following codecs in the same order : G722, G711 U-law, G711 A-law, G.729
- Topology Hiding, you can leave it unchecked, when checked reduces the information included in the SIP Via Headers and Record-Route
- Caller Name Policy, leave it as default “Use Teams Policy”

Once completed click on "Save Settings"


Here there is a video showing a generic PBX Creation, to run in fully compatibility mode use the defaults values recommended above

    • Related Articles

    • 7. TeamMate Redundancy Explained

      When using the PBX Connector redundancy has to be implemented by Enterprise admins in two fronts, the Ringlogix PBX and the TeamMate Gateways Ringlogix PBX Redundancy To achieve effective redundancy the PBX Settings must be set with the following ...

    • 3. TeamMate Enterprise Provisioning

      Enterprise Provisioning Once the Reseller's account has been activated via the e-mail received when the account was created, the first screen shown after login will be "Enterprises", in this screen Resellers are allowed to create new Enterprises ...

    • 1. TeamMate PBX Connector - Getting Started

      What is TeamMate? TeamMate is a gateway platform which provides Hosted PBX vendors like Ringlogix integration with Microsoft Teams allowing existing Teams users to have access to additional services like the PBX Connector. How the PBX Connector ...

    • 4. TeamMate - Setting Up Direct Routing

      Set Up Direct Routing Ensure you have the correct Microsoft Office licensing, you will need to have at least 1 available unassigned user license with the "PHONE SYSTEM" or comparable add-on that allows you to use Direct Routing. The Microsoft Teams ...

    • 2. TeamMate Reseller Creation

      Using your Master Reseller credentials login into the TeamMate portal https://service.connecttoteams.com in the main screen you will see "Add Reseller", click it In the new Reseller provisioning page (see below) you must enter the following: - ...