Answering Rules

Answering Rules

By default, every Users inbound calls will try to ring their main device for 25 seconds and if the call is not answered it will then go to their voicemail.

Answering Rules allow the User to have pre-configured profiles that control their inbound calls with flexible features like screening, forwarding and simultaneous ring.

Each User can have multiple Answering Rules that can be activated by Time Frames or Drag and Drop management.



Useful Tips.
  • You should create any needed Time Frames before creating an Answering Rule. It's good to have an "Anytime" or "Always" rule for simple setups.
  • Answering Rules are used in the order listed, top to bottom.
  • If more than one Answering Rule matches a Time Frame the top most rule will be used.
  • Answering Rules can be re-arranged by dragging and dropping them to the desired order. You must click Save for the changes to apply.
  • When entering an Onnet forward destination you will see a drop down of destination options appear. You may select any option to go directly to that destination.


Creating an Answering Rule.

1. Login to the PBX Dashboard.

2. If logged in as an Office Manager go to the Users page, click the desired User and go to the Answering Rules tab  - or - if logged in as a User go to the Answering Rules page and click Add Rule.

3. Select a Time Frame when the profile will be active enter the settings and click Save. 

*Note: See below for a detailed description is the available fields and settings.





Answering Rule Fields and Settings.

Feature

Description

Time Frame

The time frame when the Answering Rule will be active.

Do Not Disturb

 Automatically sends any incoming call directly to voice mail.

Call Screening

Caller will be prompted to record their name. The User will be notified with the Caller's name and given the option to Answer, Direct to Voice Mail or Reject the call.

Forward Always

User's device(s) will not be rung and the call will automatically be forwarded to the specified destination.

Forward When Busy

Forwards call to the specified destination if User has no call paths available.

Forward When Unanswered

Forwards call to the specified destination after the Ring Timeout expires.

Forward If Device Offline

Forwards call to the specified destination if the Users device is not connected to the network (is Offline). Useful for power and internet outages.

Simultaneous Ring

Allows multiple phones or destinations to ring at the same time.

Include User's Extension: Ring main device/phone

Ring All User's Phones: Ring all additional devices/phones User has.

Answer Confirmation for Offnet Numbers: Will ask called destination to press 1 to accept the call. Helpful to avoid sim ring calls to cell phones ending up in cell phone voicemail.

Extension, number or Phone: Enter any onnet or offnet destination you want to simultaneously ring. Click + to add more destinations. Use the time icon to apply a delay before ringing that destination.

*Note: Sim ring includes devices/phones not Users. A sim ring to 101 will ring the main phone for 101 and not follow the Users settings. You can ring any specific phone for a User by entering the full phone extension. For example 101m to ring their mobile app.

Just ring User's Extension

Normal Operation: Rings your desk phone and goes to voicemail after the Ring Timeout expires

    • Related Articles

    • PBX Guide - Extension User

      The Extension User PBX Guide is a complete user manual for the RingLogix private label hosted PBX solution. It describes all the Extenion level functions like voicemail, call records, answering rules and more. It is designed for the following scopes. ...

    • Call Parking Ringback

      Overview By default, parking lots created in the 710 - 719 range will have ringback enabled. This means that calls parked in this range will "ring back" to the original extension that parked the call after the default 5 minute timer has expired. More ...

    • Adjust Ringback Timer for Parking Lots

      Parking lots in the 701-709 (Dynamic) and 710-719 (Static) ranges have the Ringback feature enabled. The Ringback feature will monitor how long a call has been held in a parking lot for and return it to the original extension if it exceeds the ...

    • Mobile App - iPhone iOS

      SNAPmobile IOS is a softphone with Portal capabilities including visual voicemail, call history, contacts, greetings, and answering rules. SIP softphone Contact Management Visual Voicemail Answering Rules Management Call History Presence Extension ...

    • Shared Line Appearance

      This article demonstrates how to set up Shared Line Appearance through Snapbuilder. Shared Line Appearance is when one button on multiple phones can be set up to share the same line. The line should have an LED associated with the button to indicate ...