Disable SIP ALG in Cyberoam

Disable SIP ALG in Cyberoam

SIP support in Cyberoam

Applicable Version: 10.00 onwards

Cyberoam supports Session Initiation Protocol (SIP) for multimedia communication such as VoIP.  

Cyberoam SIP Module is enabled by default and provides the following functionalities for SIP traffic:

•         Works on UDP port 5060.

•         NATing of local IP addresses to public IP addresses.

•         Enables a dynamic voice channel by setting up an expected voice connection in the Firewall.

The administrator can disable the SIP module by following the steps mentioned below: 

1.    Logon to the CLI console and select option 4. Cyberoam Console from the Main Menu list.

2.    Execute the following command:

 console> cyberoam system_modules sip unload  
 
 

Note:


To load SIP module again, execute the following command at the console prompt:

 

             
 
 

                                                                                   Document Version: 1.2 - 30 October, 2014