VoIP Quality Test

VoIP Quality Test

The following test are designed to perform simulated VoIP calls ranging from 5 to 15 concurrent voice paths for 90 second intervals.

Additional options include using low or high bandwidth codecs like G729 or G711.

 

2 Day - Agent Based Test

Clicking any of the links below will open a new page where you can download a zero install agent that will self install, run the selected test for approximately 48 hours, then automatically uninstall when complete.

This will provide a 2 day sample of the customers VoIP Quality expectations with their current ISP and LAN settings.

These test are great for collecting data spread over a long period of time giving a better picture of your connectivity throughout the work day.

 

G729 Low Bandwidth Test

      

G711 High Bandwidth Test

5 Active Calls

10 Active Calls

15 Active Calls

  

5 Active Calls

10 Active Calls

15 Active Calls

 

 

One Time - Web Based Test

Web based test run in your computers browser via a java applet. These test allow you perform 1 - 90 second VoIP Quality test of your choice and are good for identify possible issues while they are happening.

They're great test for technicians and customers to run in their own whenever they're suspicious of possible connectivity issue.

*Note: Web based test are 1 time only for 90 seconds. If you are experiencing re-occurring voice quality issues throughout the work day it is recommended that you run a 2 Day Agent Based Test.

 

G729 Low Bandwidth Test

      

G711 High Bandwidth Test

5 Active Calls

10 Active Calls

15 Active Calls

  

5 Active Calls

10 Active Calls

15 Active Calls

    • Related Articles

    • VoIP Quality Test Results

      Understanding VoIP Qaulity Test After running a 48 hour VoIP Quality Test, we review the results to see what the test found during the time it was running. When reading the results, notice that there are eight columns. Up and Down Jitter, Up and Down ...

    • Audio Quality

      The following are examples of problems with audio quality. Echo Choppy Buzzing / Static / Interference Beeping or Tones Delayed Speech or Dead Air Echo Echo can occur when voice traveling out from the earpiece or speaker makes its way back into the ...

    • Internet Speed Test

      Link: RingLogix Internet Speed Test. When setting up QoS on any router, it is equally important to setup traffic shapping. If not, all outgoing packets, whether prioritized or not, may congest your WAN uplink and create self induced packet loss. We ...

    • SIP ALG Detector

      A SIP ALG can and usually does exist on Routers, Modems or in rare cases a managed switch. You must disable this feature for any VoIP service to operate as expected. Client Based Testing This link will download a small .exe agent that can test for ...

    • How to Disable SIP ALG by Router Model

      Overview Listed below are the common methods for disabling SIP ALG for common devices used. If your device is not listed we recommend you contact the manufacturer or consult the manual to see if your device supports disabling SIP ALG and the ...