Unofficial Guides
Mikrotik - NAT Rule (Port Forwarding)
In the event port forwarding is needed, a NAT Rule will need to be created in the Mikrotik. For this example, the NAT Rule is to allow access to a device on IP 192.168.88.100 using port 80 (extension 100). For devices such as onsite PBX that have ...
Mikrotik - Change LAN Subnet
By default Mikrotik use the following LAN subnet, 192.168.88.0/24 with the gateway IP being 192.168.88.1. For this example the Mikrotik's subnet is being changed to 10.0.0.0/24 with a gateway IP of 10.0.0.1. There are six items that will be updated. ...
How to setup a Guest Wifi network on a Mikrotik
Mikrotik - DNS DoS Attack Prevention
If you are experiencing high ping times and/or slower than normal internet speeds, you might be a victim fo a DNS DoS attack. This article will walk you through creating a firewall rule on Mikrotik routers to block this attack. Log into your Mikrotik ...
How to make a Mikrotik act as a wireless station
How to make a Mikrotik act as a wireless station *Purpose: In this case, we have a customer that uses a wireless cell modem for Internet access which lacks ethernet ports, but we would also like to give access to some devices that are not wifi ...