Call Parking Ringback

Call Parking Ringback

Overview

By default, parking lots created in the 710 - 719 range will have ringback enabled.

This means that calls parked in this range will "ring back" to the original extension that parked the call after the default 5 minute timer has expired.



Can you make calls ringback to a different extension?

Yes. These steps will show you how to park a call using extension XXX and make it ring back to extension YYY. 

**In this example "User - 9101" will be the ring back destination for any call parked at lot 721.**

1. Create a parking lot in a range that does NOT have ringback already enabled. For example 720 - 749.

2. Go to the Users page, un-check Hide System Users and select the applicable parking lot User.


3. Go to the Answering Rules tab, edit the default rule, and enter the ring-back-to destination in the "When Unanswered" field. Do NOT edit any other field.

    • Related Articles

    • Adjust Ringback Timer for Parking Lots

      Parking lots in the 701-709 (Dynamic) and 710-719 (Static) ranges have the Ringback feature enabled. The Ringback feature will monitor how long a call has been held in a parking lot for and return it to the original extension if it exceeds the ...

    • Add / Edit Call Parking Lots

      The RingLogix PBX Platform offers 3 methods of Call Parking. 1. Dynamic: the User dials the star code " *** " during an active call and it is automatically parked in the first available parking lot. The system will then announce the lot number the ...

    • Add / Edit Call Queues

      Call Queues are a great way to manage high traffic inbound call flows. When a caller reaches a queue, usually from an Auto Attendant or direct Phone Number route, the caller is placed in a virtual hold while the system tries to find an available User ...

    • Call Parking in SNAPmobile Web

      This topic explains how to use the new call park functionality in SNAPmobile web. Now you will be able to use call park in your SNAPmobile web browser based webphone. This functionality at your fingertips means less switching between web and manager ...

    • PBX Feature Codes - Star Codes

      Overview Listed below are the default feature codes available to all Users. Most codes begin with a star key followed by 2-3 digits. Codes may be added or modified by the RingLogix Support Team upon request*. Please note that certain extension ...