Generic Router Help
Disable SIP ALG on Dlink DSR-250/250N /500/500N/1000/1000N
test
Disable SIP ALG in Cyberoam
SIP support in Cyberoam Applicable Version: 10.00 onwards Cyberoam supports Session Initiation Protocol (SIP) for multimedia communication such as VoIP. Cyberoam SIP Module is enabled by default and provides the following functionalities for SIP ...
Logging into a Comcast Modem (Default Log Ins)
These are default usernames and passwords. Open an internet browser and enter the IP of the Comcast modem. Try one of the following addresses to access the modem. Please note you may need to connected to the modem directly when trying to access it. ...
List of Incompatible Devices (Routers/Firewalls)
Incompatible Devices Actiontec GT704WG Current Status:Not Compatible Recommendation:Replace device Comments: This router is not SIP Compatible. Drops calls after 20 seconds. Asus RT-N66U Current Status:Not Compatible Recommendation:Replace device ...
How to Disable SIP ALG on Fortinet / FortiGate
How to Disable SIP ALG on Fortinet / FortiGate SIP ALG is used to try and avoid configuring Static NAT on a router. Its implementation, however, varies from one router to another, often making it difficult to inter-operate a router with SIP ALG ...
Router Compatibility and VoIP Installation Best Practices
Router Support In general we’ve found that our Private Label VoIP services work well with most commercial routers. However, please consider that most “off-the-shelf” Residential and SOHO routers usually don’t have the processing power needed to ...
How to Disable SIP ALG on TP-Link ADSL modem router
Download doc here
How to turn off Netopia 3000 (SIP ALG) off
How to turn off Netopia 3000 (SIP ALG) off to have your DSL setup work with VOIP systems. *Netopia has SIP Passthrough "on" by default. (Or SIP ALG in newer models) In order to work with 3NG Networks, you must turn SIP Passthrough (SIP ALG) off. The ...