Avaya IP Office 9.1 Configuration Guide

• Related Articles

• Netgen HX40xE Fax ATA Configuration Guide

  This article will show you how to configure the Netgen Fax ATA for use on the RingLogix T38 IP Fax platform. Netgen HX40xE Configuration Guide 1. Power on the device and connect the PC port to your internet switch or router. 2. The device will ...

• Cisco SPA8000 Configuration Guide

  Find the IP address of the Cisco SPA8000. Connect an analog phone to the first FXS port. From the analog phone dial **** (four asterisks). Then press 110# to determine the IP address (the system will speak the address, EXAMPLE: 192.168.1.130). Once ...

• Grandstream UCM61XX Configuration Guide

  To log into the PBX, use the IP address found on the LED screen of the UCM. Use a web browser and go to that address. Since the web GUI is using https, it will warn you that the "site's security certificate is not trusted" or you will see an SSL ...

• Yeastar MyPBX Configuration Guide

  To access the Yeastar MyPBX's web GUI, please change network settings to be on the 192.168.5.X subnet. Logging In & Changing Password From a web browser go to 192.168.5.150 Log in using the default User Name: admin Password: password The system will ...

• Cisco SPA112 Basic Configuration Guide

  Find the IP address of the Cisco SPA-112. Connect an analog phone to the first FXS port. From the analog phone dial **** (four asterisks). Then press 110# to determine the IP address (the system will speak the address, EXAMPLE: 192.168.1.130). Once ...