IPitomy Configuration Guide

• Related Articles

• Netgen HX40xE Fax ATA Configuration Guide

  This article will show you how to configure the Netgen Fax ATA for use on the RingLogix T38 IP Fax platform. Netgen HX40xE Configuration Guide 1. Power on the device and connect the PC port to your internet switch or router. 2. The device will ...

• Cisco SPA8000 Configuration Guide

  Find the IP address of the Cisco SPA8000. Connect an analog phone to the first FXS port. From the analog phone dial **** (four asterisks). Then press 110# to determine the IP address (the system will speak the address, EXAMPLE: 192.168.1.130). Once ...

• 3CX Configuration Guide

  RingLogix is proud to be part of a select group of Providers that have been officially tested and certified by 3CX. Note: Before trying to configure your 3CX phone system please make sure you have already created a customer and activated a SIP Trunk ...

• Asterisk Distribution Configuration Guide

  For Asterisk setups the following needs to be done. Find the Asterisk version Modify extensions_custom.conf Add SIP Trunk For this example we will be using Elastix. Finding Asterisk Verison Use Putty or use the Asteris-CLI asterisk -r core show ...

• Grandstream UCM61XX Configuration Guide

  To log into the PBX, use the IP address found on the LED screen of the UCM. Use a web browser and go to that address. Since the web GUI is using https, it will warn you that the "site's security certificate is not trusted" or you will see an SSL ...