SIP Trunk Billing and Max Call Paths
The RingLogix Platform enables partners to bill and manage max call paths on any SIP Trunk service.
Each SIP Trunk service will have its own Max Call Paths setting and assigned Subscriptions.
Manage SIP Trunk Billing and Max Call Paths.
1. Log in to the RingLogix portal and select a Customer from the Search screen.
2. Go to the SIP Trunk page and click the Settings icon for the Trunk you want to manage.
3. Go to the Billing tab.
4. The increase or reduce the usable call paths (think of it as how many "lines" they have), click Edit on Max Call Paths make your changes then click Save.
5. To Add a new Subscription click the Click to Add button.
6. To Delete an Active or Accidentally inserted Subscription click the Delete icon.
*Note: For more information on billing and subscription management please see the Billing Engine category of articles.
Each SIP Trunk service will have its own Max Call Paths setting and assigned Subscriptions.
Manage SIP Trunk Billing and Max Call Paths.
1. Log in to the RingLogix portal and select a Customer from the Search screen.
2. Go to the SIP Trunk page and click the Settings icon for the Trunk you want to manage.
3. Go to the Billing tab.
4. The increase or reduce the usable call paths (think of it as how many "lines" they have), click Edit on Max Call Paths make your changes then click Save.
5. To Add a new Subscription click the Click to Add button.
- Select the new Subscription from the Name menu.
- If allowed and needed enter a Quantity (Usually only done for 1 unit subscriptions)
- The Monthly Fee is the default monthly amount that will be charged.
- If applicable enter a discount. This will be deducted from the monthly fee.
- Select a Start Date. This is when the subscription will activate.
- Once ready click Save Changes.
6. To Delete an Active or Accidentally inserted Subscription click the Delete icon.
*Note: For more information on billing and subscription management please see the Billing Engine category of articles.
Related Articles
Add New SIP Trunk
Our white label SIP Trunk solution is compatible with any SIP enabled device. This includes IP PBX systems and FXS or PRI Gateways that convert SIP signaling to traditional handoffs used by legacy PBX and key systems. Add a SIP Trunk Add or Search ...SIP Trunk Settings
The RingLogix SIP Trunking solution is compatible with all customer premise equipment, both SIP enabled and analog based. It offers flexible routing options, easy call channel management, built in fail-over and integrated billing. In this article we ...SIP Trunk Failover
The RingLogix White Label VoIP Platform offers a free failover and disaster recovery feature on all its SIP Trunking services. There are currently 2 options when using this feature Simple and Follow Me. The Simple method will route affected calls to ...Adtran 904 PRI Config
*****REQUIRED***** Serial Connection for console access to the device *****INSTRUCTIONS***** The config template provided below will setup a registration based SIP Trunk on an ADTRAN 904 with a PRI out. It does not include any of the networking ...3CX Configuration Guide
RingLogix is proud to be part of a select group of Providers that have been officially tested and certified by 3CX. Note: Before trying to configure your 3CX phone system please make sure you have already created a customer and activated a SIP Trunk ...