PBXs and ATAs
Netgen HX40xE Fax ATA Configuration Guide
This article will show you how to configure the Netgen Fax ATA for use on the RingLogix T38 IP Fax platform. Netgen HX40xE Configuration Guide 1. Power on the device and connect the PC port to your internet switch or router. 2. The device will ...
Cisco SPA112 Basic Configuration Guide
Find the IP address of the Cisco SPA-112. Connect an analog phone to the first FXS port. From the analog phone dial **** (four asterisks). Then press 110# to determine the IP address (the system will speak the address, EXAMPLE: 192.168.1.130). Once ...
Avaya IP Office 9.1 Configuration Guide
Please find attached the 3NG Networks - Avaya IP Office 9.1 - SIP Trunking Configuration documentation.
Yeastar MyPBX Configuration Guide
To access the Yeastar MyPBX's web GUI, please change network settings to be on the 192.168.5.X subnet. Logging In & Changing Password From a web browser go to 192.168.5.150 Log in using the default User Name: admin Password: password The system will ...
Cisco SPA8000 Configuration Guide
Find the IP address of the Cisco SPA8000. Connect an analog phone to the first FXS port. From the analog phone dial **** (four asterisks). Then press 110# to determine the IP address (the system will speak the address, EXAMPLE: 192.168.1.130). Once ...
Adtran 904 PRI Config
*****REQUIRED***** Serial Connection for console access to the device *****INSTRUCTIONS***** The config template provided below will setup a registration based SIP Trunk on an ADTRAN 904 with a PRI out. It does not include any of the networking ...
Grandstream UCM61XX Configuration Guide
To log into the PBX, use the IP address found on the LED screen of the UCM. Use a web browser and go to that address. Since the web GUI is using https, it will warn you that the "site's security certificate is not trusted" or you will see an SSL ...
IPitomy Configuration Guide
Trunk Config Settings for IPitomy PBX
3CX Configuration Guide
RingLogix is proud to be part of a select group of Providers that have been officially tested and certified by 3CX. Note: Before trying to configure your 3CX phone system please make sure you have already created a customer and activated a SIP Trunk ...