WHAT IS NAT?
NAT (Network Address Translation) is a technology most commonly used
by firewalls and routers to allow multiple devices on a LAN with
'private' IP addresses to share a single public IP address.
SHOULD I CONFIGURE SPECIFIC SIP OR NAT TRAVERS...
SIP support in Cyberoam
APPLICABLE VERSION: 10.00 ONWARDS
Cyberoam supports Session Initiation Protocol (SIP) for multimedia
communication such as VoIP.
Cyberoam SIP Module is enabled by default and provides the following
functionalities for SIP t...
HOW TO DISABLE SIP ALG ON FORTINET / FORTIGATE
SIP ALG is used to try and avoid configuring Static NAT on a router.
Its implementation, however, varies from one router to another, often
making it difficult to inter-operate a router with SIP ALG enable...
Download doc here
[http://support.clouditsp.com/images/How%20to%20Disable%20SIP%20ALG%20on%20TP.docx]
HOW TO TURN OFF NETOPIA 3000 (SIP ALG) OFF TO HAVE YOUR DSL SETUP WORK
WITH VOIP SYSTEMS.
*Netopia has SIP Passthrough "on" by default. (Or SIP ALG in newer
models) In order to work with 3NG Networks, you must turn SIP
Passthrough (SIP ALG) off.
THE S...
INCOMPATIBLE DEVICES
ACTIONTEC GT704WG
CURRENT STATUS:Not Compatible
RECOMMENDATION:Replace device
COMMENTS: This router is not SIP Compatible. Drops calls after 20
seconds.
-------------------------
ASUS RT-N66U
CURRENT STATUS:Not Compatible
RECOMME...
These are default usernames and passwords.
Open an internet browser and enter the IP of the Comcast modem. Try
one of the following addresses to access the modem. Please note you
may need to connected to the modem directly when trying to access it.
ht...
When power is lost and devices restart, the phones usually come back
up faster than modems or routers or on site PBXs. Since the modem
and/or router (or PBX) are not ready, the phones fail to register when
they come up from restart.
The best thing to do...
ROUTER SUPPORT
In general we’ve found that our Private Label VoIP services work
well with most commercial routers.
However, please consider that most “off-the-shelf” Residential and
SOHO routers usually don’t have the processing power needed to
ma...