RingLogix is proud to be part of a select group of Providers that
have been OFFICIALLY TESTED AND CERTIFIED BY 3CX.
> NOTE: Before trying to configure your 3CX phone system please make
> sure you have already created a customer
>
[https://support.ringlo...
*****REQUIRED*****
Serial Connection for console access to the device
*****INSTRUCTIONS*****
The config template provided below will setup a registration based SIP
Trunk on an ADTRAN 904 with a PRI out. It does not include any of the
networking settin...
For Asterisk setups the following needs to be done.
* Find the Asterisk version
* Modify extensions_custom.conf
* Add SIP Trunk
For this example we will be using Elastix.
-------------------------
FINDING ASTERISK VERISON
Use Putty or use t...
Please find attached the 3NG Networks - Avaya IP Office 9.1 - SIP
Trunking Configuration documentation.
FIND THE IP ADDRESS OF THE CISCO SPA-112.
* Connect an analog phone to the first FXS port.
* From the analog phone dial **** (four asterisks).
* Then press 110# to determine the IP address (the system will
speak the address, EXAMPLE: 192.168.1.130...
Find the IP address of the Cisco SPA8000.
* Connect an analog phone to the first FXS port.
* From the analog phone dial **** (four asterisks).
* Then press 110# to determine the IP address (the system will speak
the address, EXAMPLE: 192.168.1.130...
To log into the PBX, use the IP address found on the LED screen of the
UCM. Use a web browser and go to that address. Since the web GUI is
using https, it will warn you that the "site's security certificate is
not trusted" or you will see an SSL error dep...
TRUNK CONFIG SETTINGS FOR IPITOMY PBX
This article will show you how to configure the Netgen Fax ATA for use
on the RingLogix T38 IP Fax platform.
NETGEN HX40XE CONFIGURATION GUIDE 1. POWER ON the device and
connect the PC PORT to your internet switch or router.
2. The device will automatic...
To access the Yeastar MyPBX's web GUI, please change network settings
to be on the 192.168.5.X subnet.
LOGGING IN & CHANGING PASSWORD
* From a web browser go to 192.168.5.150
* Log in using the default
* User Name: ADMIN
* Password: PASSWORD
...
